9livesracing
Corvette Splitter - C6 ‘05- 13
Corvette Splitter - C6 ‘05- 13
Couldn't load pickup availability
Splitters are here!
Sold in 3 materials.
- Rocket Nose V3 is an organic composite material that is coated in a low friction polymer. Aka it's tough as nails, lightweight and will last forever.
- Rocket Nose V3 Raw Edge, we don't paint the leading edge black (fastest, less expensive).
- Carbon, you're mad if you want this. Yes, it's light, but it's expensive as all get out. You really wanna smash this thing?
- DIY paper template: 1:1 scale paper template. So you can cut it yourself from whatever you like.
This splitter along with a Wáng can increase your Downforce by over 290%!!! Made from 1/2" birch plywood and then coated with tough and ready "Rocket Nose Coating" for years of dependable service without hurting the bank.
The process starts with 1/2 plywood, CNC cut pockets to make it feather-light. The CNC continues to radius the edges for smooth transitions and cuts a pocket for your Nine Lives Splitter ramps. We then send it off to be coated, the same company that coats the splitters also coats rockets for a major missile defense company. *USA chant intensifies* We then take the single pieces and box them up.
- 5" splitter
- Sized to match all NLR wangs Aluminum and Carbon.
- CNC Cut in America
- Rocket Nose coating is UV resilient and weather tight.
- Excess material removed for featherweight operation.
- Pockets Cut for easy Splitter Ramp upgrades.
- Sturdy Boii splitter mount ready
- splitters weigh in around 20lbs.
Add on splitter ramps
These splitter ramps are not ordinary, they are precisely designed by Morlind Engineering. The same people that developed aero packages for The Riley Daytona Prototype, the Panoz Esparante, and the DeltaWing.
Note, the black is Downforce. Notice how it grows when we introduce our ramps.
These ramps can give an incredible 10% bump in downforce. Front aero is already hard to find and now it's easy.
Warranty/ Returns/Lead times
Wangs and Mega wings are covered by Wang Guarantee. Splitters, Sturdy Bois, and air dams, based upon the nature of the use (and proximity to the earth), carry no warranty and are non-refundable. If you bolt these items to the car you own 'em.
* Open air testing numbers available at https://9livesracing.com/cfd-testing
Copyright © 2018 Nine Lives Racing LLC - All Rights Reserved.
What's included
- Model-specific primary mounts
- Adjustable side mounts
- Necessary hardware (bolts, rivnuts, t-nuts, etc.)
- Paper drilling template
- Paper splitter template
- Horn relocation bracket
Don't forget the splitter.!! click here. to see options.
-
More Downforce = Faster = Lower lap times.
-
Crafted from aluminum.
-
Replacement parts are ambidextrous for easy spares.
-
Replacement parts are available for purchase.
-
Stress risers for emergency break away to prevent frame damage.
-
If contact occurs, mounts will snap before damaging your frame.
Warranty/ Returns/Lead times
Wangs and Mega Wings are covered by the Wang Guarantee. Splitters, Sturdy Boiis, and air dams, based upon the nature of the use (and proximity to the earth), carry no warranty and are non-refundable. If you bolt these items to the car you own 'em.
*Open air testing numbers available at https://9livesracing.com/cfd-testing
Copyright © 2022 Nine Lives Racing LLC - All Rights Reserved.
Share












After installing these splitter mounts I was able to corner on rails. I opted to get the paper template for cutting my own plywood splitter since i figured it would get broken. it held up well, had to add some extended supports due to being 6inchs out from bumper. I would recommend not running supports straight forward (like in the pic) but rather on a angle out such as this: / \
I opted for the wood splitter, as I find these products to be somewhat consumable. The durability is top notch, i have hit it, Knocked it, and it all holds in place with the sturdy boi mounts. There's less understeer on course and the car is more stable at speed.