• A promotional image for 9livesracing featuring a large logo at the top. Below the logo, text reads, "New Rear Wing Kit for Audi TT 2nd gen. 06-2014 Under Development. Check back soon." The background depicts an abstract, purple-tinted image of a car with a spoiler designed for optimal downforce.
  • A sleek, lightweight Audi TT 2nd gen. 06-2014 shelf by 9livesracing, featuring a minimalist design with black brackets on both ends. The metallic silver surface glimmers, and the brackets sport small white logos near the bottom. The entire piece is set against a plain white background.
  • A digital rendering features two sleek, modern, rectangular benches with black side supports and metallic seats. Each bench, characterized by its minimalist, angular design elements crafted from light aluminum, proudly displays a small logo of a stylized figure on the side supports. The benches cast shadows from a light source. The design is evocative of the 9livesracing Audi TT 2nd gen. 06-2014 aesthetic.
  • A table displaying aerodynamic data with three columns for angle of attack (AOA), air velocity, and drag. Two line graphs are shown: one comparing downforce vs. velocity, the other comparing drag vs. velocity for AOA values at 0, 3, and 6 degrees with a light aluminum rear wing kit installed on an Audi TT 2nd gen. (2006-2014) by 9livesracing.
  • A partial view of the Audi TT 2nd gen. 06-2014, by 9livesracing, reveals a black knife blade attached to a sleek, light aluminum handle against a white background. The bottom of the handle is adorned with a small white stick figure logo.
  • Two elongated objects with black bases and upward-extending white and gray sections are shown against a white background. The object on the left, likely part of a Rear Wing Kit designed for improved downforce for the Audi TT 2nd gen. (2006-2014), features a small humanoid logo near the base from the brand 9livesracing.
  • Featured against a white background, the Audi TT 2nd gen. 06-2014 car spoiler by 9livesracing, known as "The Megga Wang," is highlighted as "The lightest Wing on the market." This rear wing kit showcases a sleek and aerodynamic design with light aluminum construction and includes a small graphic of a figure in white on one end.
  • A sleek, modern black bench complemented by a flat, elongated seat and supported by two angular legs at each end. The supports are adorned with a minimalist 9livesracing logo depicting a white human figure with outstretched arms and legs. Inspired by the track-tested precision of the Audi TT 2nd gen. 06-2014, the design casts a delicate shadow on a pristine white background.
  • Diagram of an Audi TT 2nd gen. 06-2014 wing endplate by 9livesracing. Features include a rear spar design that increases strength and helps prevent trunk damage, and an adjustable wing angle up to 40 degrees. Constructed from lightweight aluminum to boost downforce and stop failures and trunk damage.
  • A comment thread on a social media platform. Stephen Drummond asks, "Do you have a coated birch front splitter?" Colt Nixon replies, mentioning the 9livesracing Audi TT 2nd gen. 06-2014 coated birch splitter with sturdy boi mounts. He notes that it has dragged on curbs but remains in fantastic shape and also suggests pairing it with a Rear Wing Kit for better downforce.
  • A computer-generated image shows fluid dynamic simulations of airflow around a horizontal structure. Green streamlines indicate flow trajectories, with a velocity legend on the left and a relative pressure legend on the right. Text reads "All taken from AOAQ @140 MPH." Emphasizing maximum downforce, this American-made Audi S4 (b5) 1998-2001 big wang kit by 9livesracing ensures low drag performance.
  • A large rear wing for a car, labeled "The Big Wang," is showcased with black end plates on either side. The caption reads "The wing that changed an industry." Constructed from lightweight aluminum, the minimalistic and aerodynamic Rear Wing Kit significantly enhances downforce. This model, designed specifically for the Audi TT 2nd gen. 06-2014 by 9livesracing, is set against a white background.
  • Close-up view of the cross-section of an Audi TT 2nd gen. (06-2014), displaying the internal structural components by 9livesracing. The image reveals the aerodynamic profile and light aluminum support structure of the vehicle part. The neutral background emphasizes its design.
  • A promotional ad for the #WangGang loyalty program featuring two sleek, black and white car spoilers. The text reads, "#WangGang loyalty program. Discounts on track-tested upgrades from Big Wang to Megga Wang for ultimate downforce on your Audi TT 2nd gen. 06-2014 by 9livesracing.
  • Illustration of the Audi TT 2nd gen. 06-2014 rear wing kit from 9livesracing. The light aluminum wing is Gurney flap ready, has a thin wall build, and showcases its proven racing shape. It highlights features such as quick downforce changes, lightweight design, over 200 race wins, and Elan Engineering.
1 15

9livesracing

Audi TT 2nd gen. 06-2014

Audi TT 2nd gen. 06-2014

$1,080.89 USD
$1,080.89 USD
Sale Sold out
Shipping calculated at checkout.
Wáng Width
Wáng Material

The Rear of your car is getting "loose." Are you looking to firm up your steering? Wanna go faster? these wing kit built specifically for the TT offer killer downforce while only using 2.2hp.  these 100% American-made wing kits, installs easily with hand tools 


FeaturesLight Aluminum construction. 

  • Light Aluminum construction. 
    • 0.2lbs per inch   
  • Gurney flap ready 
  • Up to 15.2:1 Lift-to-Drag ratio*
  • Low drag = More top speed!
  • American Made 
  • Track Tested 

What's included:

  • Wing sized to your choice of 71" (body width) or 55"
  • Model-specific pylons (no cookie cutter solutions here!)
  • NLR “basic” End plates 10"x8"
  • Stainless Steel hardware
  • Fits M3, coupe, sedan, and four door
  • 328i available on request

Upgrade end-plates To MEGA end-plates 

  • 12"x10.75" huge end-plates
  • Increases downforce by 10%*
  • DECREASES drag by 7%!!*
  • NASA legal  
  • AOA adjustment.   

Warranty/ Returns/Lead times

Click here for current shipping estimates for new orders. All items are built to order. Uprights that are not built by 9LR will ship directly from manufacturer. 

Powder coat or vinyl "wang skin" upgrades are strongly recommended. Otherwise, wings are shipped raw, and while aluminum does not corrode the same way ferrous metals do, your wing will get progressively uglier as it is exposed to the elements.

Wangs and Mega wings are covered by Wang Guarantee.  Splitters, Sturdy Bois, and air dams, based upon the nature of the use (and proximity to the earth), carry no warranty and are non-refundable. If you bolt these items to the car you own 'em. 

* Open air testing numbers available at https://9livesracing.com/cfd-testing

Copyright © 2018 Nine Lives Racing LLC - All Rights Reserved.

View full details